LA-Baton Rouge, Qualifications:   BS Degree, Engineering Discipline5+ years of reliability, inspections, and testing experience from a chemical or petrochemical plantFamiliar with mechanical integrity programs and NDT                 Description: Will be focal point for plant inspections.Will ensure records are maintained to document mechanical integrity of plant systems and equipment as per applicable industry c

TX-Houston, Houston area valve company is seeking an entry level Mechanical Engineer or experience QA/QC technician that has experience identifying valve failure issues.  Candidates must have experience with Failure Modes Effects Analysis (FMEA), Positive Materials Identification (PMI) and NDT testing techniques.Ideal candidate will have 3 years experience doing valve Quality  Assurance /Quality control work

MI-Jackson, Description: Responsible for the assigned manufacturing processes including equipment specification, tooling design, gauging, quality, and efficiency. Collect and analyze manufacturing data and implement process improvements that improve safety, product quality, customer delivery, and cost reductions. Provide on-floor process information for training and meeting engineering standards. Support spec

TX-Stafford, Job Title: Inspector BLocation: Stafford, TexasReports to: Quality Manager Tyco Flow Control (TFC), headquartered in Princeton, NJ, is a $4 billion global segment within Tyco International growing at double digit revenue rates the past few years.  With three strategic areas of emphasis (Valves and Controls, Water, and Thermal Controls), this segment is the largest manufacturer of valves, actuators

TX-Shenandoah, Crane Energy Flow Solutions, a global valve manufacturer, distributor and service provider, has an immediate opening for a Welding Engineer at its Shenandoah, Texas, facility. Basic Function:The Welding Engineer reports directly to the corporate Director of Global Quality with welding process responsibility for global Energy locations as well as at key strategic suppliers.  This position establish

PA-Pittsburgh, Civil & Environmental Consultants, Inc. (CEC) is an environmental and civil engineering corporation providing consulting services to private industry, commercial enterprises, real estate developers, architects, and public agencies.  CEC creates an entrepreneurial environment for its employees and provides opportunity for personal and professional growth.  We currently have 11 offices located in ei

TX-Grapevine, A large aviation company has immediate openings for Level II NDT/NDI technicians in the DFW airport area.Looking for candidates who are level II certified and have all documentation to show. Must be flexible on all shifts. Pay depends on experience and ranges from $19-21.50hr.Please contact Valerie Beane at 972-348-1831 for more information.Required Skills: NON DESTRUCTIVE TESTING, NDI, NDT LEVEL

TX-Houston, Our client is currently recruiting for:Senior Technician (Nondestructive Testing) – Houston TXDetermines the appropriate NDT method and then performs or directs nondestructive testing on aircraft, engines, and/or components.Conducts training and examining of less senior NDT personnel in the methods for which the Level III Senior Technician is qualified.This position is responsible for ensuring the

OK-Tulsa, Mission:With little supervision, performs Non Destructive Testing (NDT), GPS survey, and other field tasks to locate pipeline defects, perform in ditch assessment, as well as other service duties on pipeline systems to support Pipeline Services (PS) offerings. Tasks:·         Utilizes Non-Destructive Testing (NDT) and GPS equipment to execute defect location and assessment tasks to support the PS

OH-Willoughby, NDT Inspector, Radiography-Level 2 or 3Applicants should be qualified to the requirements of NAS 410, ASNT SNT-TC-1A, or have comparable NDT experience. Must comprehend and follow customer specifications and process work instructions. This position requires good PC skills, effective communication skills, dimensional inspection experience, etc. Aerospace industry experience, along with Lean mfg and

OH-CANTON, Republic Engineered Products is North America's leading supplier of Special Bar Quality (SBQ) steel, a highly engineered product used in axles, drive shafts, suspension rods and other critical components of automobiles, off-highway vehicles and industrial equipment.We're Everywhere!Republic's steel goes into everything from bicycles and hand tools to bulldozers and automobiles. Odds are you've see

AZ-Phoenix, Client company is looking for 1 direct placement NDT-Radiographer Level II to work in REDMOND, OREGON. This position is NOT located in Phoenix, AZ. Client company will consider some relocation benefits. Position is paying $20.70 per hour.GENERAL SUMMARY:Position evaluates radiographs of castings according to work instructions and dispositions castings as either acceptable, repair, or scrap.ESSENTI

CO-Denver, Client company is looking for 1 direct placement NDT-Radiographer Level II to work in REDMOND, OREGON. This position is NOT located in Denver, CO. Client company will consider some relocation benefits. Position is paying $20.70 per hour.GENERAL SUMMARY:Position evaluates radiographs of castings according to work instructions and dispositions castings as either acceptable, repair, or scrap.ESSENTIA

NM-Albuquerque, Client company is looking for 1 direct placement NDT-Radiographer Level II to work in REDMOND, OREGON. This position is NOT located in Albuquerque, NM. Client company will consider some relocation benefits. Position is paying $20.70 per hour.GENERAL SUMMARY:Position evaluates radiographs of castings according to work instructions and dispositions castings as either acceptable, repair, or scrap.ESS

UT-Salt Lake City, Client company is looking for 1 direct placement NDT-Radiographer Level II to work in REDMOND, OREGON. This position is NOT located in Salt Lake City, UT. Client company will consider some relocation benefits. Position is paying $20.70 per hour.GENERAL SUMMARY:Position evaluates radiographs of castings according to work instructions and dispositions castings as either acceptable, repair, or scrap.

CA-Los Angeles, Client company is looking for 1 direct placement NDT-Radiographer Level II to work in REDMOND, OREGON. This position is NOT located in Los Angeles, CA. Client company will consider some relocation benefits. Position is paying $20.70 per hour.GENERAL SUMMARY:Position evaluates radiographs of castings according to work instructions and dispositions castings as either acceptable, repair, or scrap.ESS

CA-San Francisco, Client company is looking for 1 direct placement NDT-Radiographer Level II to work in REDMOND, OREGON. This position is NOT located in San Francisco, CA. Client company will consider some relocation benefits. Position is paying $20.70 per hour.GENERAL SUMMARY:Position evaluates radiographs of castings according to work instructions and dispositions castings as either acceptable, repair, or scrap.E

WA-Seattle, Client company is looking for 1 direct placement NDT-Radiographer Level II to work in REDMOND, OREGON. This position is NOT located in Seattle, WA. Client company will consider some relocation benefits. Position is paying $20.70 per hour.GENERAL SUMMARY:Position evaluates radiographs of castings according to work instructions and dispositions castings as either acceptable, repair, or scrap.ESSENTI

OR-Portland, Client company is looking for 1 direct placement NDT-Radiographer Level II to work in REDMOND, OREGON. Client company will consider some relocation benefits. Position is paying $20.70 per hour.GENERAL SUMMARY:Position evaluates radiographs of castings according to work instructions and dispositions castings as either acceptable, repair, or scrap.ESSENTIAL JOB FUNCTIONS:1. Evaluate, disposition and

TX-Grapevine, A leading aviation repair company near DFW Airport has immediate openings for Level II NDT/NDI technicians.Requirements:Qualified candidates should be level II certified and have all documentation to show.Must be flexible on all shifts. Pay depends on experience and ranges from $19-22hr.Please apply or contact Jason Jobe at 972-348-1833.Required Skills: NON DESTRUCTIVE TESTING, NDI, NDT LEVEL 2, N